There’s something deeply comforting about a handmade nativity scene. It carries stories, memories, and a quiet kind of reverence that mass-produced decorations just can’t match.
If you’re looking to create something meaningful this year, these 25 DIY nativity scene ideas are a beautiful way to bring heart and warmth into your home.
Some are playful, others are rustic or reverent, but all of them invite a slower, more thoughtful kind of Christmas. Gather your craft supplies, a bit of patience, and maybe the kids.
#1. Round Box Lid Nativity Dioramas
These charming mini nativity scenes are crafted inside upcycled round box lids, each becoming a tiny stage for the Holy Family.
Against a hand-painted starry night backdrop, Joseph, Mary, and baby Jesus sit nestled in a bed of raffia straw.
What makes this set extra special is the ribbon attached to the top of each lid, turning them into hangable ornaments or wall-ready holiday keepsakes.
Materials Needed
- Round box lids (4-5” diameter)
- 3 small wooden beads (0.75”)
- 3 short wooden dowels (1.5”)
- Felt pieces in green, blue, brown, white (4” x 4” squares)
- Glitter paper or wooden stars (1.5” wide)
- Navy blue cardstock
- White paint
- Raffia (1 handful per lid)
- Decorative ribbon (6” per lid)
- Glue gun and scissors
Step-by-step Guide
Step 1: Glue navy cardstock into the inside back of each lid. Then add white stars using a fine brush or white pen.
Step 2: Assemble the figures by gluing beads onto dowels or pegs. Now you wrap each in a rectangle of felt and glue in place for clothing.
Step 3: Roll a bead in white felt and glue to create baby Jesus. You can add a bit of raffia as a cozy nest beneath the family.
Step 4: Glue all three figures inside the lid. Finally, attach a star above and a ribbon loop behind for hanging or displaying.
#2. Pebble Nativity Scene on the Shore
Wow, this breathtaking nativity was sculpted right into the sand using nothing but smooth ocean pebbles. It’s a reminder that beauty and reverence can arise from the simplest materials.
Plus, the contrast of white, gold, and deep slate stones brings Mary, Joseph, and baby Jesus to life with soft silhouettes, all beneath a shining star outlined in shells and gravel.
Materials Needed
- Assorted beach pebbles (white, black, gray, gold, and rust-toned)
- Flat sandy surface (wet sand holds better)
- Driftwood (optional)
- Optional: sea glass, shells, or seaweed
Step-by-step Guide
Step 1: Sketch your nativity layout gently into the sand using a stick or your finger.
Step 2: Sort stones by color and size. Then use lighter pebbles for faces and halos, darker tones for robes and stables.
Step 3: Begin placing stones along your outline, adjusting to follow the contours and flow of the shapes.
Step 4: Finally, add details like stars, manger legs, or halos with smaller stones or shell fragments.
Tip: Snap a photo at golden hour for stunning shadows and soft highlights that make it feel even more divine.
#3. Wooden Tag Nativity Ornaments
You can see each ornament features the Holy Family crafted from wooden dowels and beads, wrapped in scrap fabric and burlap for a warm, homespun feel.
The figures are mounted on a stained wooden tag, topped with a wooden star, and accented by twine loops with wooden beads, ready to hang on your Christmas tree.
Whether you make one or a dozen, they carry a message of peace and humble beginnings.
Materials Needed
- Wood slats or craft tags (2.5” x 5”)
- 2 rectangular wood blocks (1.5” x 0.5” each) and smaller one for baby
- 3 wooden round beads (0.75” and 0.5”)
- Small fabric scraps (2” x 3”) in neutral tones
- Burlap strips (1” x 3”)
- Mini wooden stars (1”)
- Twine and wooden beads (3-4 per hanger)
- Hot glue gun and scissors
Step-by-step Guide
Step 1: Glue two rectangular wood blocks vertically onto each wood tag to form the bodies of Mary and Joseph.
Step 2: Attach a wooden bead on top of each for the heads, then glue a third, smaller bead cradled in burlap as baby Jesus in front.
Step 3: Wrap each adult figure in fabric or burlap shawls and secure with hot glue.
Step 4: Add a small wooden star at the top of each tag for decoration.
Step 5: Now you just thread wooden beads onto twine, tie a loop, and glue it to the back for hanging.
#4. Altoid Tin Nativity Scene with Mini Clay Figurines
Amazingly, the night sky is hand-painted with speckled stars, creating a dreamy celestial backdrop. Inside, polymer clay figures capture every character from the Holy Family to the visiting Wise Men.
Tiny straw tufts add texture to the base, making this scene feel like a miniature storybook come to life.
Of course, this diy is perfect for gifting or keeping close during the holidays.
Materials Needed
- 1 empty Altoid tin (approx. 3.7” x 2.3” x 0.8”)
- Polymer clay in assorted colors (at least 7-8 small blocks)
- Wooden toothpicks (cut to 2”-3”)
- Acrylic paint (black, blue, white, gold)
- Paintbrush
- Hot glue gun or strong craft glue
- Straw filler
- Gold foil stars (optional)
Step-by-step Guide
Step 1: Paint the inside of the tin with dark blue and dot white stars using a fine brush or toothpick. Let it dry completely.
Step 2: Sculpt each nativity figure from polymer clay, keeping sizes under 1.5” so they fit inside the tin. You can bake according to clay instructions.
Step 3: Create a mini stable frame using cut toothpicks or craft sticks, glue it inside the left panel.
Step 4: Add straw or raffia as bedding, then carefully glue each figure into place on both sides of the tin.
Step 5: Finish with a painted gold star above the stable and optional gold trim around the outside of the tin.
Tip: You can personalize the tin’s outer cover with decorative paper or a miniature label to make it even more special as a gift.
#5. Painted Wood Nativity with Starburst Baby
There’s a whimsical charm in this hand-painted nativity scene, where bold colors and gentle lines turn tradition into cheerful storytelling.
Joseph stands tall in crimson and green, while Mary’s soft blue robe echoes serenity. Baby Jesus beams from a star-shaped cradle that radiates warmth like a sunrise.
Plus, the wooden stable is surrounded by faux moss and delicate florals, adding a garden-like tenderness to the holy night.
Materials Needed
- Wooden cutouts (Mary, Joseph, Jesus, star, base pieces)
- Acrylic paints (various colors)
- Paintbrushes (fine and broad)
- Hot glue or wood glue
- Artificial moss, vines, and mini flowers
- Wooden or cardboard stable structure
Step-by-step Guide
Step 1: Paint your wooden figures in soft but vivid colors, adding facial features and clothing details.
Step 2: Paint and assemble the stable using rustic tones for a natural look.
Step 3: Glue the figures in place, with baby Jesus cradled in the center and the star behind him as a radiant backdrop.
Step 4: Next, add decorative touches like moss, faux vines, and flowers to frame the scene.
Step 5: Display on a shelf, mantel, or entryway table for festive impact.
#6. Minimalist Rustic Nativity Scene with Fabric Wraps
This charming nativity captures warmth and humility with just a few earthy materials. Wooden peg dolls are dressed in neutral fabrics and twine, wrapped simply but lovingly.
Specially, the red stitched ribbons add a sweet homespun detail, while a tiny evergreen sprig and glittering gold star bring a hint of festive sparkle.
All figures are displayed on a slice of raw-edge wood, grounding the piece in natural texture and tone.
Materials Needed
- 1 wood slice base (approx. 5” diameter)
- 3 wooden pegs (approx. 1”)
- Twine (1 yard)
- Neutral-tone fabric scraps (4”-5” square)
- Red and white ribbon (12” total)
- White baby sock
- Coconut fiber
- Mini pine sprig
- Gold glitter star (1.5” wide)
- Hot glue gun and scissors
Step-by-step Guide
Step 1: Wrap twine around two pegs to create the torsos of Mary and Joseph. Then glue them upright onto the wood base.
Step 2: Drape each figure in soft fabric, folding it like a cloak or shawl. You can use red ribbon to tie around the shoulder or waist.
Step 3: Swaddle a small wooden bead or shaped fabric bundle in white sock fabric to represent baby Jesus. Then nestle it into a bed of coconut fiber.
Step 4: Add a pine sprig behind the figures and secure a glittery star above with glue.
Step 5: Finally, tuck and adjust the fabric and bedding to give the scene a cozy, gathered look.
#7. Rustic Burlap Nativity Wreath
Featuring a handcrafted Holy Family made entirely from jute, raffia, and neutral textiles, the design leans into a raw, earthy charm.
Moreover, the figures are snugly nestled in a bed of straw-like fibers, giving the scene a warm, natural feel.
It’s a thoughtful twist on the typical wreath, one that honors the nativity without saying a word. Perfect for farmhouse-style doors or anyone drawn to handmade minimalism.
Materials Needed
- 12″ foam or wire wreath base
- Jute twine (approx. 20 ft)
- Burlap fabric scraps (4″×4″ for each figure, plus 12″×2″ for bow)
- Shredded raffia (1 handful)
- Gold decorative star (6″)
- Wood angel cutout (optional)
- Hot glue gun & glue sticks
- Scissors
Step-by-step Guide
Step 1: Wrap your wreath base completely in jute twine, overlapping slightly as you go. Then secure ends with hot glue.
Step 2: Craft the Holy Family by rolling small burlap bundles and tying them with twine to form heads and bodies. You can ad subtle details like lace-trimmed cloaks or twine belts if desired.
Step 3: Glue shredded raffia to the bottom center of the wreath to form a nest-like bed. Then secure your three figures on top.
Step 4: Attach a gold star to the upper side, curving downward, and finish with a big burlap bow at the bottom.
Step 5: Use a burlap loop at the top to hang. Optionally, add a wooden angel or accent piece above the star.
#8. Burlap Tent Nativity Scene
This charming nativity scene feels both grounded and sacred, like a quiet stable tucked away on a hillside.
Using humble materials like burlap and wood, you can recreate this peaceful vignette that captures the warmth of Christmas.
Plus, the tent-like shape gives it an intimate, storytelling feel, perfect for a window nook or tabletop centerpiece.
Materials Needed
- 1 wood slice base (approx. 12″ diameter, 1″ thick)
- 1 piece of burlap fabric (16″×16″)
- 1 metal wire (18″ long)
- Hot glue gun and glue sticks
- Mini nativity figurines (8-10 pieces, 2″-3″ tall)
- Small clumps of moss
- Optional: twine or jute rope
Step-by-step Guide
Step 1: Start by bending your metal wire into an arched frame that peaks in the center, this will shape the burlap into a tent.
Step 2: Drape the burlap over the wire and adjust the folds to create a soft triangle shape. You can use hot glue to secure the fabric to the wooden base at three points: left, right, and rear.
Step 3: Arrange your nativity figurines in the center of the base. Then place baby Jesus at the front, surrounded by Mary, Joseph, and the others.
Step 4: Tuck bits of moss at the tent’s edges to soften the base and add a touch of nature.
Step 5: If desired, tie a bit of twine at the top peak to keep the burlap snug and give it a rustic finish.
#9. Rustic Pinecone Nativity Scene
This adorable nativity trio uses pinecones to create a textured, woodland-inspired display. The figures stand on a slice of wood base, adorned with green moss and a golden glitter star held above.
Bonus, a small shepherd’s crook made from a cinnamon stick or painted skewer adds the sweetest finishing touch.
This project has a cozy, homespun feel that brings nature and nativity together beautifully, ideal for tabletops or gifting.
Materials Needed
- 1 wood slice base (approx. 5″-6″ diameter)
- 2 medium pinecones (2”-2.5” tall)
- 1 mini pinecone (1” tall)
- 3 wooden beads (0.75”-1” diameter)
- Felt pieces in white, tan, and brown (approx. 4” squares)
- Burlap ribbon (2” wide, 6” long)
- Green moss (1 handful)
- 1 glitter foam star (1.5” wide)
- 1 floral wire (4” long)
- Mini pinecone
- Hot glue gun and scissors
Step-by-step Guide
Step 1: Glue the two medium pinecones upright onto the wood slice to form Mary and Joseph. Then attach a wooden bead to each top with hot glue for their heads.
Step 2: Wrap a piece of burlap or tan felt around each pinecone as a cloak. Secure it with glue at the back.
Step 3: Wrap the mini pinecone in white felt like a swaddle and glue a smaller bead on top to form baby Jesus. You can place him lying down in front of the parents.
Step 4: Add moss to cover the base, creating a soft bedding effect. Now, insert floral wire or stick with glued glitter star at the back for a celestial touch.
Step 5: Glue a small stick or cinnamon stick next to Joseph to act as the shepherd’s staff.
#10. Rolled Paper Strip Nativity Scene
This minimalist nativity captures the sacred moment using nothing but tightly rolled strips of printed paper, or even repurposed pages from a book or hymnal.
The coiled shapes, pressed into elegant curves, create a sculptural silhouette of Mary, Joseph, and baby Jesus that feels modern yet meaningful.
It’s the kind of project that invites mindfulness, requiring slow hands and quiet focus.
Materials Needed
- Old book pages, hymnal sheets, or printed text paper (cut into strips)
- Glue stick
- Round base (cardboard or wood disc)
- Toothpick (optional)
- Scissors
Step-by-step Guide
Step 1: Cut your paper into long, even strips, around 1 cm wide is ideal.
Step 2: Roll strips tightly into spirals or oval shapes. Then secure with a dab of glue at the end.
Step 3: Shape and layer the coils to form each figure including Joseph with a taller frame and staff, Mary in a seated or curved form, and baby Jesus nestled in an oval cradle.
Step 4: Glue the figures onto a sturdy base and allow everything to set.
Step 5: Display your quiet masterpiece somewhere it can speak for itself.
Tip: If using religious texts, you can try positioning meaningful phrases near the front of each figure for added sentiment.
#11. Mini Felt Peg Doll Nativity in a Gift Box
Interestingly, this tiny nativity is packed with heart, tucked neatly into a wooden crate that feels like a gift wrapped in warmth.
The peg dolls, lovingly dressed in soft felt cloaks like Joseph in earthy brown and Mary in a serene blue, stand beside baby Jesus, snuggled in a tiny pouch of straw.
It’s small enough to cradle in your hands but big enough to warm any room with its message.
Materials Needed
- 3 wooden peg dolls (2.5-3” tall for adults, 1-1.5” for baby)
- Felt sheets (brown, green, blue, pink)
- Mini wood crate (approx. 5”x3”x3”)
- Hot glue and scissors
- Shredded raffia
- Blue glitter paper
- Mini Christmas picks, gold ribbon, and small star
Step-by-step Guide
Step 1: Cut felt into cloaks and wrap each peg doll, gluing gently at the back.
Step 2: Line the bottom of the crate with raffia to resemble hay. Then secure the peg dolls inside, positioning baby Jesus in the center.
Step 3: Add glittery blue paper to the back wall as a night-sky accent.
Step 4: Finish with faux greenery, a gold bow, and a star on top for a magical touch.
#12. Terracotta Pot Nativity Scene
This miniature nativity set brings together rustic warmth and festive charm using tiny terracotta pots.
Joseph and Mary stand proudly in upturned 2-inch clay pots, each with hand-painted wooden heads and soft fabric wraps for their robes. Baby Jesus lies in a slightly smaller pot, nestled in a cozy bed of raffia or shredded straw.
Everything is placed neatly on a round wood slice base, making the whole scene feel grounded and handcrafted.
Materials Needed
- 2 terracotta pots (2″ diameter)
- 1 mini terracotta pot (1.5″ diameter)
- 3 small wooden balls (1″ and 0.5″)
- Neutral fabric scraps (approx. 3” squares)
- 1 handful of raffia, moss, or shredded paper filler
- 1 small stick (approx. 4″ long)
- 1 wood slice (approx. 5-6″ wide)
- 1 wooden skewer and glitter star
- Hot glue gun and glue sticks
- Black and red marker
Step-by-step Guide
Step 1: Turn the terracotta pots upside down to form the bodies. Then you glue the larger wooden balls on top for heads.
Step 2: Wrap small scraps of fabric around Mary and Joseph as cloaks or headscarves, gluing them in place.
Step 3: Fill the smaller pot with raffia, then glue in the baby’s wooden head. You can also add a halo or star above using a skewer.
Step 4: Glue all three figures onto the wooden base and position the twig near Joseph to act as his staff.
Step 5: Finally, use markers to draw simple faces on each figure for a sweet finishing touch.
#13. Open Book Nativity Display
There’s something deeply poetic about using a book to tell the Christmas story, especially when its pages gently curve into a handmade shelter.
This scene transforms an ordinary hardcover into a glowing manger scene, with arched pages forming a soft sanctuary.
Also, the characters look lovingly at baby Jesus, while warm fairy lights and rustic touches like pinecones and berries make it feel straight out of a storybook.
Materials Needed
- 1 hardcover book (at least 300 pages)
- Wood slice base (12″-14″ diameter, 1″ thick)
- 3-4 mini nativity figurines (2″-3″ tall)
- Miniature pinecone and faux red berry stem (6″-8″)
- Warm LED fairy lights (1 small string)
- Hot glue gun with glue sticks
- Thin dried grass, moss, or Spanish moss (small handful)
- Optional: gold fern sprigs
Step-by-step Guide
Step 1: Begin by choosing a book that will stand up well on its own. Then gently curve 4-6 front pages inward and glue them to the base to form arches.
Step 2: Repeat with the back pages to create a tunnel-like shelter. You can secure with glue at both the base and upper folds for stability.
Step 3: Attach the book to the wood base using hot glue so it doesn’t tip over. Then nestle your figurines under the arched pages.
Step 4: Add fairy lights under and around the figures to create a soft glow. You now hide the battery pack behind the book or under moss.
Step 5: Glue pinecones, berries, and ferns to the top of the book for a festive crown that ties everything together.
#14. Denim Scrap Nativity Scene
This denim nativity trio is packed with personality and texture, proving that even the most unexpected material, old jeans, can tell a timeless story.
Crafted with wooden doll heads and simple cylindrical bodies, Mary, Joseph, and baby Jesus are wrapped in various shades of upcycled denim.
Set on a round base, this design feels grounded yet artistic, perfect for anyone who loves meaningful crafts with an eco-friendly twist.
Materials Needed
- 1 small wooden round base (3-4” diameter)
- 2 wood peg dolls (approx. 2.5” height)
- 1 mini peg doll (1”)
- Scrap denim pieces in different shades (4” x 4” each)
- Hot glue gun and glue sticks
- Fine-tip black marker
- Small stick (approx. 3” for shepherd’s staff)
- Scissors
Step-by-step Guide
Step 1: Cut strips of denim to wrap around the peg dolls and glue in place to form robes and hoods.
Step 2: Dress the baby doll in a lighter denim swaddle and secure with glue.
Step 3: Use a fine-tip marker to draw expressive eyes and brows on each wooden face.
Step 4: Attach the figures to the round base using hot glue for stability.
Step 5: Finally, glue a small twig to Joseph’s side as a shepherd’s staff for a finishing touch.
#15. Upcycled Plastic Bottle Nativity Scene
With its top reshaped and base trimmed into an open display, the bottle becomes a rustic manger filled with meaning.
Inside, Mary and Joseph are formed from painted wooden pegs, with pinecone bodies adding woodland texture. A tiny green-wrapped baby Jesus lies nestled in Spanish moss.
Bonus, he painted surface and aged texture give it a handcrafted, earthen finish that pairs beautifully with natural elements like the pine sprig and twine.
Materials Needed
- 1 plastic soda bottle (2-liter, cut open front)
- 2 small pinecones (2-3” tall)
- 3 round wooden beads (0.75” diameter)
- Brown craft paint + sponge
- Gold cardstock (2” wide)
- LED mini light (1 bulb)
- Small faux greenery sprig (3”)
- Spanish moss (1 handful)
- Scrap fabric
- Hot glue gun and scissors
Step-by-step Guide
Step 1: Cut a wide arched opening into the front of the bottle. Then trim any sharp edges cleanly.
Step 2: Paint the bottle’s outer surface with a mix of brown and gold tones using a sponge for texture. Let dry.
Step 3: Glue pinecones vertically to create Joseph and Mary. You now attach wooden beads or peg heads, then wrap with small felt or cloth pieces as cloaks.
Step 4: Wrap a mini bead in green cloth to represent baby Jesus and nestle it into the moss.
Step 5: Attach a cardstock star above and fix an LED bulb behind it to illuminate. Then tuck in moss and greenery for a finished look.
#16. Elegant Yarn and Fabric Nativity Figurines
Crafted from yarn, wood, and fabric scraps, these figures carry a dignified presence. Joseph’s beard, Mary’s flowing hair, and baby Jesus swaddled in twine, every detail is carefully chosen to feel both rustic and refined.
Displaying this set on a mantel or side table creates a moment of calm reverence amidst holiday cheer.
What makes this design stand out is the tall, slender form and soft, neutral palette with just the right pop of color in Mary’s deep red skirt.
Materials Needed
- 3 wooden peg dolls (5″ tall, 2″)
- Chunky yarn: beige, ivory (approx. 24″ total)
- Scrap fabrics: red velvet (7″×8″), white cotton (6″×6″), brown knit or burlap (4″×5″)
- Hot glue gun and glue sticks
- Gold metal rings (2.5″ diameter)
- Twine or white cord (12″ length)
- Scissors
Step-by-step Guide
Step 1: Start by gluing yarn hair onto the wooden heads. You can use longer strands for Joseph’s beard and trim to shape. Mary’s hair can be laid flat in two sections and tucked behind her shoulders.
Step 2: Wrap each adult figure with fabric: red velvet for Mary’s dress, and a neutral white for Joseph. Then use glue to secure the fabric in place at the back.
Step 3: Add shawls or cloaks using textured or knitted fabric, draped loosely and fixed with glue near the neckline.
Step 4: For baby Jesus, wrap a mini wooden bead or peg in soft twine or white cloth. Now you place in Mary’s arms and secure gently with glue.
Step 5: Finish by attaching the gold rings as halos behind Mary and Joseph’s heads.
#17. Rustic Peg Doll Nativity with Glitter Star
Crafted with peg dolls and natural textures, this nativity scene brings a humble warmth to your holiday table.
The Holy Family is created using small peg dolls wrapped in burlap and soft felt, Mary and Joseph look on lovingly while baby Jesus rests in a tiny cradle.
Above them, two craft sticks form a triangle shelter, topped with a sparkling golden star that adds just the right touch of festive glow.
Materials Needed
- 1 wood slice round (approx. 6” diameter)
- 3 unfinished peg dolls (1.5” to 2” tall)
- 2 jumbo craft sticks (5.5” length)
- Small piece of glitter foam
- Burlap and light blue felt
- Hot glue gun
- Raffia or straw
- Fine-tip marker (black)
Step-by-step Guide
Step 1: Glue the two craft sticks into an inverted “V” shape and attach to the wood slice base to form a stable frame.
Step 2: Cut out a star shape from glitter cardstock and glue it to the top point of the sticks.
Step 3: Wrap the peg dolls in burlap and felt, securing with glue. Then use a marker to draw closed eyes and soft smiles.
Step 4: Create a baby bundle with a smaller peg and burlap, nestling it in a small shredded straw crib.
Step 5: Arrange the figures on the base with straw underneath and glue in place securely.
See more: 25 Magical Christmas Popsicle Stick Crafts to Delight Kids and Parents Alike
#18. Cardboard Tube Nativity Scene for Kids
This adorable DIY nativity scene made from cardboard tubes is perfect for little hands. Mary, Joseph, and baby Jesus come to life with happy smiles and simple shapes, making it a gentle way to teach the nativity story.
The backdrop includes barn animals like a horse, sheep, and hen, all cut from colored cardstock to complete the storytelling.
Furthermore, this project is ideal for classrooms, Sunday school, or crafting afternoons at home, where kids can proudly show off their handmade stable.
Materials Needed
- 3 cardboard tubes (4″ height each)
- Colored construction paper or cardstock (variety of colors)
- Glue stick and/or craft glue
- Scissors
- Black marker for faces
- Yarn, twine, or string (12″)
- Optional: cotton balls or felt scraps
- Small box or cardboard (8″×10″)
Step-by-step Guide
Step 1: Wrap each tube in colored paper to create the robes for Mary and Joseph. You can use tan, blue, and brown tones for a traditional look.
Step 2: Add faces with markers, and glue small circles of paper or felt for hair or beards. Then tie a string or thin yarn around the middle like a robe belt.
Step 3: Roll a small piece of white paper into a baby shape, draw a smiling face, and place it on top of yellow hay strips for the manger.
Step 4: Cut and glue animals from cardstock or print templates online. Now, tape them inside the backdrop to create a cozy stable feel.
Step 5: Assemble all figures in the scene and enjoy this sweet handmade nativity!
#19. Felt Nativity Ornament in a Christmas Tree Frame
This sweet little nativity scene captures the spirit of Christmas with soft felt and childlike charm.
The Holy Family is tucked lovingly inside a Christmas tree-shaped backdrop, stitched together in vibrant shades of red, blue, green, and gold.
Moreover, this project makes a perfect wall hanging, door decoration, or even a tree ornament if you scale it down.
Materials Needed
- Felt sheets: green (9″×12″), red (6″×6″), blue (6″×6″), light blue (3″×3″), brown (3″×3″), beige (3″×3″), white (3″×3″)
- Embroidery thread in gold, black, red, and green
- Stuffing
- 10-15 small silver star embellishments
- 1 large felt (about 1.5″)
- Needle, scissors, and hot glue
Step-by-step Guide
Step 1: Cut out all felt shapes: a large Christmas tree base, three human figures (Joseph, Mary, and baby Jesus), and their clothing layers. Don’t forget to trim tiny details like hair, belts, and the halo star.
Step 2: Begin stitching each figure using coordinating embroidery thread. Then add small stuffing to the body sections before sealing them closed for a soft, plush feel.
Step 3: Arrange the family pieces onto the tree background and glue or stitch them into place.
Step 4: Decorate the tree with felt leaves, mini stars, and tiny red berries. Next, sew or glue on the top star last.
Step 5: Now, add a loop at the top if you’d like to hang it or mount it on fabric for a festive wall piece.
#20. Soft Minimalist Crochet Nativity Scene
Sometimes, quiet elegance speaks the loudest and this nativity scene is proof.
Wrapped in soft crochet and neutral fabric, each figure radiates warmth without saying a word. The handmade tree, topped with a golden star and delicate lace, gives the entire display a comforting glow.
You don’t need vivid color to tell a sacred story. With gentle textures and tender simplicity, this craft invites peace and reflection.
Materials Needed
- 3 wooden balls (1.5″ diameter for heads)
- 2 short wooden pegs (1.5″-2″ tall)
- Cream or white chunky yarn (1 skein)
- Neutral cotton fabric (12″ × 12″)
- Mini crochet or lace doily (5″-6″ diameter)
- Wooden tree cutout (7″-8″ tall)
- Mini gold pipe cleaner
- Hot glue gun and glue sticks
- Felt (1.5″)
Step-by-step Guide
Step 1: Start by creating the base, you glue your mini doily onto a flat surface or wooden disc to anchor your scene.
Step 2: Attach the wooden heads to the peg bodies using hot glue. Then wrap each figure with crocheted yarn and fabric to form robes and head coverings.
Step 3: Bend a gold pipe cleaner into a small shepherd’s staff and place it in Joseph’s hand. You can use a small yarn ball or pom-pom as a sheep.
Step 4: Position your fabric or wooden tree behind the figures. Then decorate it with tassels, lace, and top it with a handmade star.
Step 5: Place baby Jesus as a small bundle between the figures, nestled securely in front, bringing the scene to life.
#21. Painted Handprint Nativity Canvas
Personal and meaningful, this handprint nativity painting captures the magic of Christmas through a child’s touch.
Each finger transforms into a unique character: wise men, Mary, Joseph, and even an angel. The palm area becomes the warm bed of hay for baby Jesus, painted sweetly in the center.
The final result is more than art. With every brushstroke, it becomes a keepsake that tells the nativity story in the most heartfelt way.
Materials Needed
- 1 canvas or thick cardstock (8″x10″ recommended)
- Non-toxic acrylic paints (various skin tones and clothing colors)
- Paintbrushes (fine tip, flat for filling)
- Paint pen
- Paper towel and water cup
- Optional: sponge or stencil
Step-by-step Guide
Step 1: Paint the entire hand (palm and fingers) with your base colors including flesh for faces, colored clothing on each finger, and golden/yellow in the palm for straw.
Step 2: Gently press the hand down onto the center of the canvas and lift carefully to reveal the print.
Step 3: Once dry, use a brush or marker to add faces, hair, halos, robes, and a baby in the middle of the palm area.
Step 4: Paint a dark blue background for the night sky and dot it with stars. Add a large guiding star near the top corner.
Step 5: Let it dry completely, then frame or hang your unique piece for the holidays.
#22. Upcycled Egg Carton Nativity
Who knew something as simple as a paper egg carton could carry such heartfelt charm? This creative nativity turns humble materials into a touching, minimalist scene.
Mary and Joseph are adorned with soft fabric cloaks, while baby Jesus is wrapped in white and crowned with a golden halo, probably a repurposed jar ring.
Plus, fresh sprigs of greenery tucked behind the figures breathe life into the scene, mimicking a pastoral backdrop.
Materials Needed
- 1 paper egg carton (cut to use 3 center peaks)
- 3 corks
- Fabric scraps (white and neutral tones, approx. 3” square)
- 1 small gold ring (jar ring, earring, or keyring)
- 3 small greenery sprigs (real or faux)
- 1 short twig
- Hot glue gun and glue sticks
Step-by-step Guide
Step 1: Cut and shape the egg carton so three tall peaks remain for figure bodies. Then glue corks or round plugs to the tops of each peak to form heads.
Step 2: Wrap small fabric scraps around each figure, securing them as cloaks and swaddles.
Step 3: Add the golden ring as baby Jesus’ halo behind his head, gluing carefully in place.
Step 4: Insert greenery behind the figures for background foliage and glue a twig beside Joseph.
#23. Upcycled Wooden Candle Holder Nativity Scene
These enchanting mini nativity scenes are cleverly made using upcycled wooden candle holders as the stable structure.
Each one is filled with charming, hand-painted miniature figures, all tucked into the cozy, hollowed space.
Whether you display one or a matching pair, this whimsical setup becomes a heartwarming centerpiece with a rustic twist.
Materials Needed
- 1 wooden candle holder (open-bottom or hollow-style)
- Miniature nativity figurines (approx. 1″-2″ height)
- Hot glue gun and glue sticks
- Spanish moss
- Mini star embellishment (wood or gold plastic)
- Optional: acrylic paint
Step-by-step Guide
Step 1: Clean the candle holder and decide its front-facing side.
Step 2: Arrange and glue the nativity figurines inside the open base, positioning larger figures in the back and animals in front.
Step 3: Fill in the floor with a bit of moss to give texture and cover glue spots.
Step 4: Add more moss to the top to simulate a rustic rooftop.
Step 5: Finally, attach a star to the front arch using a dab of glue. Optionally, you can paint a soft background scene or attach angels like shown.
#24. Rustic Wood Slice Nativity Ornament
In this diy, a miniature Holy Family scene is delicately painted onto a natural bark-edged round, complete with a snowy setting, glowing star, and two evergreen trees framing the stable.
Bonus, the earthy textures of the wood and the soft pastel tones give it a warm, handcrafted feel that’s perfect for farmhouse Christmas decor.
Materials Needed
- 1 round wood slice (3.5″-4″ diameter)
- Acrylic paint set (blue, brown, yellow, green, white, skin tones)
- Paintbrushes (small detail and round brush)
- Twine string (8″-10″)
- 2-3 wooden beads (optional)
- Drill (if needed)
- Clear acrylic sealer (optional)
Step-by-step Guide
Step 1: Lightly sketch the nativity scene onto your wood slice using pencil.
Step 2: Fill in the stable, holy family, trees, and snowy base with acrylic paints. Use thin layers and allow drying between colors.
Step 3: Add a yellow star at the top and white dots for snow to complete the background atmosphere.
Step 4: Drill a small hole at the top of the slice if it doesn’t already have one.
Step 5: Thread the twine through the hole, add beads if desired, and tie a loop for hanging.
#25. Scallop Shell Nativity Ornament
Gracefully simple yet deeply symbolic, this handmade nativity scene turns a large scallop shell into a stunning ornament.
The shell, with its natural ridges and iridescent sheen, becomes the backdrop for a miniature holy family surrounded by sweet figurines.
I believe this ornament captures the warmth and meaning of Christmas in a coastal, earthy way.
Materials Needed
- 1 large scallop shell (approx. 4–5 inches wide)
- Miniature nativity figurines (each 1″-1.5″ tall)
- Gold acrylic paint (small bottle)
- Fine paintbrush (size 0-2)
- Wood shavings (1/2 cup)
- Craft star embellishment (1.5″)
- Hot glue gun and glue sticks
- Gold string or ribbon (8″)
Step-by-step Guide
Step 1: Rinse and dry the shell. Then you can paint the outer edge with gold acrylic paint and let it dry.
Step 2: Add a layer of wood shavings to the base of the shell using hot glue.
Step 3: Arrange and glue the figurines inside the shell, placing the Holy Family in the center and animals to the sides.
Step 4: Attach the star near the top of the shell using hot glue. Then tie a loop with gold string and glue it to the back for hanging.
