Tired of tangled necklaces, missing keys, or accessories scattered everywhere? These three DIY hanging solutions are the perfect fix—and they’re as stylish as they are functional.
Whether you’re working with limited space or just love putting your personal touch on home decor, these projects help you stay organized while adding character to your walls.
Each idea is easy to make, budget-friendly, and completely customizable to match your vibe. From repurposed materials to clever designs, these hanging hacks are proof that storage can be beautiful too.
#1. Crochet Jewelry and Sunglasses Holder
This handmade piece became one of my favorite multi-tasking organizers. A simple crochet panel doubles as a delicate earring display and a holder for necklaces and sunglasses.
Materials Needed
- 1 crocheted rectangle (approx. 10×14 inches)
- 2–4 push pins
- 10–15 pairs of earrings
- Necklaces, chains, and a few pairs of sunglasses
Step-by-step Guide
Step 1: Crochet a rectangular panel using a tight but open stitch (like double crochet) and finish with a scalloped or simple border.
Step 2: Pin the piece flat to the wall using tacks at the corners, stretching gently so it stays smooth.
Step 3: Insert earrings directly through the stitch holes in the upper section.
Step 4: Use the lower loops to hang necklaces and slide in the arms of your sunglasses. Adjust spacing to avoid tangling.
#2. Floral Hanger Jewelry Organizer
I made this necklace holder from an old clothes hanger and a handful of faux daisies and it brightened up my wall and my mood.
Materials Needed
- 1 plastic or wooden clothes hanger
- 6–10 pushpins
- Faux flowers (approx. 8–10 blooms)
- Hot glue gun and glue sticks
- Optional: acrylic paint
Step-by-step Guide
Step 1: If you’d like to change the color of the hanger, paint it first and let it dry completely.
Step 2: Use hot glue to attach the faux flowers along the top edge of the hanger. Let them fully set.
Step 3: Evenly space out pushpins or thumbtacks along the bottom bar of the hanger. These will hold your necklaces.
Step 4: Hang the hanger on a wall hook, and drape your jewelry neatly to prevent tangles and show off your collection.
#3. Vintage Drawer Jewelry Organizer
I found an old wooden drawer at a thrift store and turned it into this charming jewelry station. It’s rustic, practical, and makes accessorizing feel like browsing a tiny boutique.
Materials Needed
- 1 vintage wooden drawer (approx. 12–16 inches wide)
- 10–12 small cup hooks
- 2 wall-mounting brackets
- Optional: velvet lining, knobs on sides
- Drill or screwdriver
Step-by-step Guide
Step 1: Clean the drawer and lightly sand any rough edges. Keep the patina if you like the vintage look.
Step 2: Drill holes along the top edge (inside or under the rim) and screw in small hooks for earrings or rings.
Step 3: Add another row of hooks along the bottom edge to hang necklaces or bracelets vertically.
Step 4: If desired, add drawer knobs or buttons to the side to hang long chains.
Step 5: Mount the drawer securely to the wall with screws or brackets. Fill it with trays, bangles, and your favorite accessories.
#4. Vinyl Record Wall Hook Rack
This upcycled project mixes music nostalgia with smart storage, giving bags, hats, and accessories a cool place to hang.
Materials Needed
- 3–5 vinyl records (standard LP size)
- 3–5 wall hooks
- Screws and wall anchors
- Drill and screwdriver
- Optional: washers
Step-by-step Guide
Step 1: Choose a flat section of wall where your records will sit evenly.
Step 2: Drill each hook through the center hole of the vinyl record and secure it with a washer and nut on the back if needed.
Step 3: Mount the record securely to the wall using screws through the outer edge (carefully to avoid cracking). Use anchors if hanging heavy items.
Step 4: Hang your tote bags, hats, or jackets from the hooks and admire your retro-functional masterpiece.
#5. Chessboard Wall Hook Organizer
With a few simple pegs or knobs, it’s now my go-to spot for headphones, keys, caps, and crossbody bags.
Materials Needed
- 1 wooden chessboard (approx. 12×12 inches)
- 6–8 small hooks, pegs, or knobs
- Screws or strong adhesive
- Wall hanging hardware
- Drill
Step-by-step Guide
Step 1: Clean and inspect the chessboard. If it’s glossy, lightly sand the surface where you’ll attach the hooks.
Step 2: Decide where to place your hooks. Space them across squares, mixing aesthetic balance with functionality.
Step 3: Drill small holes and screw in your hooks or glue them down if using adhesive pegs.
Step 4: Attach wall-mounting hardware to the back. Make sure it’s centered for weight balance.
#6. Dartboard Jewelry Organizer
The dart holes are perfect for inserting hooks or straight pins, making it surprisingly functional for storing necklaces, bracelets, and hoops.
Materials Needed
- 1 standard dartboard
- 10–15 pushpins
- Hanging hardware
- Jewelry (necklaces, earrings, bracelets)
Step-by-step Guide
Step 1: Hang the dartboard securely on the wall using its built-in hook or add a picture hanger on the back.
Step 2: Insert pushpins or screw-in hooks into the dartboard’s surface, placing them at various points along the circles and numbers.
Step 3: Hang your jewelry from the hooks, using different sections for different types—necklaces at the bottom, hoops or chains at the center.
#7. Memory Cork Board
This cork board is more than just decor, it’s my daily dose of inspiration, faith, and friendship. I filled it with photos, quotes, and mementos that reflect who I am and what I value.
Materials Needed
- 1 cork board with frame (approx. 18×24 inches)
- 10–15 push pins
- Twine (about 3 feet)
- 12–20 Polaroids, cutouts, or keepsakes
- Tape
Step-by-step Guide
Step 1: Mount the cork board on a wall at eye level using nails, adhesive strips, or hooks.
Step 2: Arrange your mementos like photos, stickers, quotes, badges and pin or clip them to the board however you like.
Step 3: Stretch the twine below the board, securing each end with a small tack or a strip of tape.
Step 4: Use clothespins to hang Polaroids or mini prints from the twine. Space them evenly or let them overlap for a relaxed look.
#8. Doily Jewelry Wall Display
This project is as sentimental as it is practical. I used a vintage crochet doily from my grandma’s stash and turned it into a charming jewelry holder.
Materials Needed
- 1 large crochet doily (approx. 12–15 inches wide)
- 3–4 clear thumbtacks
- Jewelry
Step-by-step Guide
Step 1: Choose a clean, flat wall and position the doily where it can spread evenly.
Step 2: Pin the doily at the top and sides using clear tacks or decorative hooks. Stretch it slightly to keep the pattern visible and taut.
Step 3: Insert earrings directly through the lace openings, and hang small chains or charms by looping them into the design.
Step 4: Rearrange or rotate pieces seasonally.
#9. Lace Earring Holder Display
I was tired of tangled earrings and missing pairs, so I created this lovely wall-mounted lace display. It’s delicate, budget-friendly, and turns your jewelry into wall art.
Materials Needed
- 1–2 yards of lace ribbon (1–2 inches wide)
- 6–8 thumbtacks
- 20–30 pairs of earrings
Step-by-step Guide
Step 1: Cut the lace into equal strips, each around 10–14 inches long depending on your wall space.
Step 2: Stretch the first strip across the wall and secure each end with a push pin. Repeat for 2–3 more rows, evenly spaced.
Step 3: Thread your earrings directly through the lace holes. For heavier ones, use wider lace or reinforce with an extra pin behind.
Step 4: Rearrange as needed whenever your collection grows.
#10. Seashell Hook Bikini Hanger
Using real or faux seashells as hooks on a wooden plank, I created a lightweight, elegant solution for storing swimsuits or light accessories.
Materials Needed
- 1 wood plank (approx. 12–16 inches long)
- 4–5 large seashells
- Strong glue
- Twine
- Drill
Step-by-step Guide
Step 1: Sand and clean the wood plank. You can leave it natural or paint it white or blue for a beachy look.
Step 2: Evenly space the shells across the plank. Glue each one firmly in place, pointed slightly upward like a hook. Let dry completely.
Step 3: Attach twine to the back or sides of the plank for hanging, using glue or small screws.
Step 4: Mount it on the wall with a hook or nail. Hang bikinis, jewelry, or keys directly from the shells.
#11. Vintage Racket Hanging Photo Display
Old wooden tennis rackets make surprisingly stylish and sentimental photo holders. I used two vintage rackets and turned them into memory boards that blend nostalgia and design.
Materials Needed
- 2 vintage wooden tennis rackets
- 6–10 mini clothespins
- Small nails
- 8–10 printed photos
- Hammer
Step-by-step Guide
Step 1: Clean the rackets and check for any splinters or damage. Lightly sand rough edges if needed.
Step 2: Decide where you want to hang them. Lay out your design on the wall.
Step 3: Hang each racket by the handle hole using a nail or wall hook.
Step 4: Clip your photos, receipts, or notes onto the string grid with clothespins. You can add twine for extra texture if you like.
#12. Wood Slice Key Holder
The bark edges and visible rings make every piece unique. It’s the kind of project that looks like art but works like a charm for busy mornings.
Materials Needed
- 1 large wood slice (about 10–12 inches wide, 1–2 inches thick)
- 6–8 wooden pegs
- Screws
- Sawtooth hanger
- Drill and screwdriver
Step-by-step Guide
Step 1: Lightly sand the front surface of the wood slice to smooth it out, keeping the bark intact.
Step 2: Mark even spacing for your hooks across the front, one row or two depending on size.
Step 3: Drill pilot holes and screw in pegs or attach them with strong wood glue. Let dry if gluing.
Step 4: Add hanging hardware to the back and mount the slice on your wall.
#13. Upside-Down Teacup Wall Hooks
Repurposing vintage teacups and saucers as wall hooks not only creates functional storage, it also brings charm and whimsy to any hallway, kitchen, or vanity space.
Materials Needed
- 2–3 matching teacups
- Industrial-strength adhesive
- Wall anchors
- Drill with tile/ceramic bit (optional)
Step-by-step Guide
Step 1: Clean and dry the backs of the teacups or saucers completely.
Step 2: Apply strong adhesive to the back, or drill a hole for a screw if using hardware for extra hold.
Step 3: Firmly press each piece onto the wall in your desired layout. Let adhesive cure fully (24–48 hours recommended).
Step 4: Once secure, hang necklaces, keys, or cords from the knobs or inner base of the cups.
#14. Bust Statue Jewelry Display
I love how this setup feels straight out of an old European dressing room. Draping necklaces over a sculptural bust not only adds personality, it turns your jewelry into art.
Materials Needed
- 1 decorative bust statue (plaster, resin, or concrete; approx. 12–18 inches tall)
- Necklaces, chains, beads, or pearls
- Optional: decorative pins
Step-by-step Guide
Step 1: Place your bust on a vanity, dresser, or shelf where it’s visible and stable.
Step 2: Drape necklaces gently over the shoulders, around the neck, or even across the base.
Step 3: Layer different lengths and textures for a curated, stylish look.
Step 4: Use pins or brooches to add details if the material allows (be gentle with delicate finishes).
#15. Wall-Mounted Purse Display
This setup changed how I organize my daily grab-and-go essentials. Below, a compact shoe rack keeps my most-used pairs neat and ready.
Materials Needed
- 1 decorative wall rack
- 6–12 handbags
- 1 two-tier shoe rack (approx. 24–30 inches wide)
- Screws and wall anchors (if required)
- Drill
Step-by-step Guide
Step 1: Choose a wall with enough height to hang bags and still leave space for a shoe rack underneath.
Step 2: Mount the wall rack securely using screws or wall anchors if needed. Check that it can support the weight of multiple bags.
Step 3: Hang your handbags from the hooks, placing the largest or heaviest ones near the ends for balance.
Step 4: Assemble the shoe rack and place it directly beneath the hanging bags. Arrange shoes by type or frequency of use.
#16. Cork and Wood Necklace Organizer
This DIY is a genius blend of simplicity and sustainability. Using wine corks and a wooden plank, you can make a chic necklace holder that keeps everything tangle-free.
Materials Needed
- 1 wooden plank (approx. 16–20 inches wide)
- 12–15 wine corks
- 12–15 small screw-in hooks
- Strong glue
- Mounting hardware
- Drill (optional)
Step-by-step Guide
Step 1: Arrange corks evenly along the plank and glue them securely with the flat side touching the wood. Let dry thoroughly.
Step 2: Once dry, screw a small hook into the center of each cork—drill tiny pilot holes first for ease if needed.
Step 3: Attach wall-mount hardware to the back of the plank.
Step 4: Mount the organizer on your wall and hang your necklaces from the hooks. Adjust spacing for chunkier items as needed.
#17. Artist Mannequin Jewelry Stand
With the outstretched arms and flexible legs, it gives your accessories life and keeps your vanity clutter-free in the most artistic way.
Materials Needed
- 1 wooden artist mannequin (about 12–14 inches tall)
- Assorted necklaces, bracelets, shell accessories
- Optional: seashell dishes
Step-by-step Guide
Step 1: Place the mannequin on a sturdy surface like a dresser or shelf where it can stand securely.
Step 2: Adjust the arms outward or upward into a balanced pose. Loop bracelets and chains over the arms.
Step 3: Use the legs for rings, or pose them creatively for added charm (like in a yoga pose or seated cross-legged).
#18. Driftwood Bikini Rack
With a piece of driftwood, thick rope, and a few simple hooks, it turned into both storage and decor.
Materials Needed
- 1 piece of driftwood (about 18–24 inches long)
- 8–10 sturdy wall hooks
- 1 thick rope (3–4 feet)
- Wall hook
- Drill
Step-by-step Guide
Step 1: Clean and dry the driftwood. Make sure it’s solid and not brittle.
Step 2: Drill evenly spaced holes along the top for your hooks about 1.5 to 2 inches apart.
Step 3: Screw the hooks into the holes, ensuring they’re tightly secured.
Step 4: Tie the rope to each end of the driftwood, creating a hanging loop. Adjust the length to suit your wall space.
Step 5: Mount it to the wall using a hook or sturdy nail. Hang bikinis by their straps for an organized, colorful display.
#19. Wall-Mounted Plaster Hands Jewelry Display
These hand casts look like they’re reaching out of the wall to offer your favorite necklaces and rings.
Materials Needed
- 5–8 plaster or resin cast hands (wall-mountable)
- Screws
- Drill and wall anchors
- Assorted jewelry: necklaces, rings, chains
Step-by-step Guide
Step 1: Arrange the hand casts on the wall before installing to plan your layout—play with angles, heights, and gesture variety.
Step 2: Mount each hand using screws through built-in backplates or secure with strong adhesive suitable for your wall surface.
Step 3: Let adhesive cure fully if used (usually 24 hours).
Step 4: Drape necklaces across fingers or let chains hang delicately from open palms. Use closed hand poses to loop rings or bracelets.
#20. Wall Shelf Necklace Organizer
This setup became my go-to solution for organizing both jewelry and daily beauty products. The slim shelf on top holds perfumes, serums, and lotion, while small hooks underneath keep necklaces from tangling.
Materials Needed
- 1 wall-mounted shelf with flat top (approx. 16–20 inches wide)
- 15–20 small screw-in cup hooks
- Screws and wall anchors
- Drill and level
Step-by-step Guide
Step 1: Mount the shelf to the wall at chest or eye level using screws and anchors. Make sure it’s level and secure.
Step 2: Evenly space and screw the hooks into the underside of the shelf—about 1 inch apart to prevent chains from overlapping.
Step 3: Hang your necklaces and chains from the hooks. Adjust spacing for chunkier pendants or sets.
Step 4: Use the top shelf to store perfumes, lotions, or decor items for easy access and a polished look.
#21. Raw Wood Jewelry Hanger
This piece is all about embracing simplicity and texture. A raw wood slab paired with a few basic nails becomes a striking and organic jewelry holder.
Materials Needed
- 1 slab or thick slice of raw wood (approx. 10–14 inches tall)
- 8–10 nails
- Mounting hardware (brackets, sawtooth hangers, or heavy-duty adhesive)
- Hammer
Step-by-step Guide
Step 1: Choose a wood piece with visible grain and character. Lightly sand the front to smooth any sharp edges.
Step 2: Hammer in nails along the top edge, evenly spaced about 1–1.5 inches apart. Leave half the nail sticking out to hang jewelry.
Step 3: Add extra nails lower down if you want to stagger shorter pieces or rings.
Step 4: Attach hanging hardware to the back or lean the slab on a shelf or dresser wall.
#22. Mannequin Jewelry and Sunglasses Holder
By using a wooden artist mannequin, I created a compact display stand for jewelry and sunglasses.
Materials Needed
- 1 wooden artist mannequin (approx. 12–14 inches tall)
- Jewelry: bracelets, necklaces, rings
- 2–3 pairs of sunglasses
Step-by-step Guide
Step 1: Place the mannequin on a flat surface like your vanity or desk. Adjust the arms outward or upward into a stable pose.
Step 2: Hang bracelets and necklaces over the arms, keeping heavier items near the base for balance.
Step 3: Drape sunglasses across the forearms, they nest perfectly and are easy to grab.
Step 4: Use the base area for small bowls or trays to hold rings, earbuds, or pins. Rotate poses anytime you want a new vibe.
#23. Framed Jewelry Display Wall
By repurposing empty picture frames and adding hanging mechanisms inside, you can create a wall full of beautiful, functional displays.
Materials Needed
- 5–7 empty picture frames (assorted sizes and shapes)
- Cup hooks, tension wire, or chicken wire
- Small nails, sawtooth hangers, or picture hooks
- Paint (optional, for a matching frame finish)
- Jewelry: necklaces, earrings, bracelets
Step-by-step Guide
Step 1: Choose and paint your frames if you want a unified look (white works beautifully for a clean vintage vibe).
Step 2: For earrings: attach chicken wire or string across the frame backing.
Step 3: For necklaces: screw in small cup hooks along the top or sides of the inner frame.
Step 4: Mount the frames on the wall using nails or picture hooks.
Step 5: Arrange your jewelry in each frame by type or color. You can mix vertical and horizontal orientation for visual interest.
