Have you ever imagined the thrill of adding a life-sized coffin to your Halloween setup? It’s the kind of prop that instantly transforms your space into something unforgettable.
DIY coffins aren’t just for haunted houses; they’re perfect for porches, yards, or even indoor party corners. You can keep them creepy and cobweb-covered or give them a more playful, quirky twist.
Building one yourself adds that personal touch that store-bought decor just can’t match. Plus, most of these projects can be made with simple materials like cardboard, wood scraps, or paint.
Here are 22 coffin ideas that will inspire you to craft your own eerie masterpiece this Halloween.
#1. Standing Skeleton Coffin
Imagine stepping onto your porch and finding this eerie sight, a grinning skeleton peeking out from an old wooden coffin, as if it’s been waiting centuries to greet visitors.
Plus, the weathered wood planks give it that authentic graveyard feel, while the tangled spider webs and giant creepy crawler on top seal the spooky charm. It’s the perfect piece for a haunted yard display, especially if you want something that looks like it came straight from a ghost town.
Materials Needed
- 1 life-size skeleton (about 5-6 ft tall)
- Old wooden planks or pallet boards (approx. 6-8 ft total)
- 1 large fake spider (8-12 inches)
- Artificial spider webs (1-2 packs)
- Hammer and nails or wood screws
- Measuring tape
- Optional: black or brown wood stain
Step-by-step Guide
Step 1: Measure and cut your wooden planks to create a coffin shape, taller at the top, narrowing toward the feet.
Step 2: Nail or screw the planks together, leaving the front partially open so the skeleton can peek out.
Step 3: Place the skeleton inside, adjusting its arms to “hold” the coffin lid.
Step 4: Drape artificial spider webs over the coffin and skeleton, making sure to stretch them thin for a realistic effect.
Step 5: Finally, add the large spider to the top corner for that final jump-scare touch.
#2. Half-Broken Coffin with Escaping Skeleton
If you want your Halloween display to tell a story, this piece does it all
without a single word. The splintered coffin lid, the skeletal grin, and those bony fingers clawing their way out create the perfect just rose from the grave scene.
Specially, it’s rugged, creepy, and ideal for anyone who loves haunted house vibes but still wants something simple to build.
Materials Needed
- 1 half-size coffin frame (approx. 3-4 ft long)
- Old, weathered wood planks or pallet boards
- 1 skeleton torso or full skeleton
- Hammer and nails or screws
- Hand saw or jigsaw
- Wood glue (optional)
- Optional: black and brown paint
Step-by-step Guide
Step 1: Build a small, angled coffin box using your wood planks, leaving the top panel loose.
Step 2: Break or saw part of the lid to give it that jagged, forced open look.
Step 3: Next, position the skeleton inside so its head and arm poke out naturally, as if mid-escape.
Step 4: Nail the lid pieces back on loosely so gaps remain for the skeleton to be visible.
Step 5: Add paint or rub dirt on the wood for that aged, fresh-from-the-grave effect.
#3. Simple Skeleton Coffin Standee
Sometimes the best Halloween decorations are the ones you can set up in minutes but still get that spooky wow factor. T
his upright coffin, lined with orange fabric and a white skeleton print, makes a fun, cartoon-like twist on the traditional creepy coffin.
It’s perfect if you want something eye-catching for your porch or hallway without using heavy materials or complicated tools.
Materials Needed
- Cardboard sheets (enough to form a 5-6 ft coffin)
- Orange fabric or large plastic tablecloth (approx. 3×6 ft)
- Skeleton print fabric or skeleton wall decal
- Black paint or black craft paper
- Hot glue gun and glue sticks
- Scissors
- Ruler or measuring tape
Step-by-step Guide
Step 1: Cut and assemble your cardboard into a coffin shape, securing the sides with hot glue.
Step 2: Cover the outside with black paint or glue on black paper for a smooth finish.
Step 3: Line the inside with your orange fabric or tablecloth, gluing it flat to avoid wrinkles.
Step 4: Attach the skeleton print so it’s centered and visible when standing upright.
Step 5: Now, you can lean it against a wall or mount it upright for guests to see as they walk by.
Tip: You can also add a battery-powered spotlight at the base for a glowing, eerie effect at night.
#4. Budget-Friendly Cardboard Coffin
If you love a quick, zero-cost Halloween project, this cardboard coffin with crisscross wood planks is your perfect weekend craft.
The jagged strips give it that hurriedly boarded-up, haunted-house vibe, as if you’ve trapped something inside that’s eager to break out.
Plus, top it off with a bright skull peeking from the shadows, and you’ve got instant fright appeal without fancy tools or expensive materials.
Materials Needed
- Large cardboard boxes (enough for a 5-6 ft coffin)
- 6-8 extra cardboard strips (approx. 3-4 in wide)
- Masking tape or duct tape
- Utility knife
- Yellow or white skull prop
- Optional: black paint
Step-by-step Guide
Step 1: Cut your cardboard into a coffin shape and tape the sides together so it stands upright.
Step 2: Cut long strips from extra cardboard to serve as wooden planks.
Step 3: Tape the strips across the coffin at random angles, leaving gaps for a creepy peek inside.
Step 4: Place your skull prop near the top opening so it peers out.
Step 5: For extra detail, lightly brush the cardboard with black paint to create a weathered, old-wood look.
#5. Spooky Skeleton Coffin Wall Decor
This wall-hanging coffin is a masterclass in eerie elegance. With jagged wooden slats, skeletal hands reaching out, and tufts of creepy moss, it looks like something right out of a haunted attic.
Moreover, the playful “Spooky” lettering paired with bats and a skull charm keeps it fun while still giving your guests a delicious shiver.
Materials Needed
- Thin wood or sturdy cardboard sheets (approx. 3 ft tall)
- Wood strips or extra cardboard
- Hot glue gun & glue sticks
- 2 plastic skeleton hands
- Mini skull prop
- Spanish moss (2-3 handfuls)
- Paper or foam bats, spider, and “Spooky” sign
- Brown paint
Step-by-step Guide
Step 1: Cut your backing board into a coffin shape. Then paint your slats brown and glue them across the coffin at uneven angles.
Step 2: Attach skeleton hands peeking from between slats and secure the skull at the bottom.
Step 3: Tuck in bits of Spanish moss around edges and openings for an aged, abandoned feel.
Step 4: Add bats, a spider, and your “Spooky” sign to complete the look.
#6. Escaping Skeleton in Rustic Coffin
If you like your Halloween scares with a dash of humor, this goofy-eyed skeleton bursting from a rustic wooden coffin will be a hit.
The pallet wood gives it that old, weathered charm, while the skeleton’s wide-eyed stare adds a silly twist that will make passersby do a double take.
Perfect for propping up near your front door or porch, it creates a playful caught in the act moment for trick-or-treaters.
Materials Needed
- Pallet wood planks (enough for a 5-6 ft coffin)
- Skeleton prop with detachable limbs
- Googly eyes or large craft eyes
- Blue fabric scrap
- Nails, screws, and drill
- Wood saw
- Optional: wood stain
Step-by-step Guide
Step 1: Cut and assemble pallet wood into a coffin shape, leaving one side partially open for a breaking out effect.
Step 2: Position the skeleton inside with one leg and one hand sticking dramatically out of the gaps.
Step 3: Dress the skeleton with the blue fabric for a splash of color and personality.
Step 4: Glue on the googly eyes to create the comical wide-eyed look.
Step 5: Finally, place it in a sunny spot so the shadows add to the drama.
#7. LED-Lit Coffin Welcome Sign
Are you looking to mix spooky with a splash of glam? this glowing pink coffin sign is the showstopper your Halloween porch needs.
The cheeky “Welcome, We’ve Been to Meet You” message instantly grabs attention, while the eerie lighting casts a mysterious, party-ready glow.
Besides, you can add a skeleton greeter nearby, and you’ve got the perfect combo of creepy and fun. This is a brilliant choice if you want your decorations to stand out both day and night.
Materials Needed
- Wooden coffin frame (about 5-6 ft tall)
- Pink LED string lights (15-20 ft)
- Black paint
- Wooden planks or signs
- White or pink paint
- Small plastic spiders
- Nails, screws, or strong adhesive
Step-by-step Guide
Step 1: Paint your coffin frame black and let it dry completely.
Step 2: Attach the wooden planks diagonally or horizontally and paint your chosen spooky greeting on them.
Step 3: Wrap the pink LED string lights around the coffin’s outline, securing them with staples or clips.
Step 4: Add spider accents to the frame and near the lettering for extra creep factor.
Step 5: Place it in a corner of your porch, plug in the lights, and let it shine all night.
#8. Bright Orange Coffin Piñata
Want to add a playful twist to your spooky setup? These orange, purple, and black coffin piñatas are perfect for a Halloween party where you want frights and fun to mingle.
Their bold colors make them pop in daylight, while the “RIP” message, bats, and spider web details keep the eerie vibe alive.
Bonus, you can hang them, lean them against a wall, or even fill them with treats for a surprise break-the-coffin moment. Kids and adults will both love them.
Materials Needed
- Cardboard coffin shape (about 3-4 ft tall)
- Orange crepe paper streamers
- Purple and black construction paper
- Black cutouts of bats, spiders, and “RIP” letters
- Glue stick or hot glue
- Scissors
- Optional: candy or small toys
Step-by-step Guide
Step 1: Cut and assemble your cardboard into a coffin shape. Then cover the front with strips of orange crepe paper, overlapping slightly for texture.
Step 2: Outline the edges with purple paper, then add black trim.
Step 3: Glue on your bats, spiders, and “RIP” lettering.
Step 4: If making a piñata, leave an opening to fill with candy before sealing.
#9. Chained and Guarded Coffin Scene
This towering coffin, bound in chunky chains and accented with rustic wooden planks, looks like it’s been guarding its ghostly secret for centuries.
The scene is made even creepier with skeletal remains, a ghoulish figure in a top hat, and an oversized spider lurking on top.
It’s a full-on statement piece that instantly transforms any corner of your home into a haunted graveyard. With a few props and some clever lighting, you’ll have guests hesitating to get too close.
Materials Needed
- Large coffin prop (around 5-6 ft tall)
- Faux wooden planks or brown-painted foam boards
- Plastic chains (8-10 ft)
- Skeleton props (full-size and skulls)
- Large faux spider
- Black netting or creepy cloth
- Brown craft paper or burlap for the ground
- Hot glue or zip ties
Step-by-step Guide
Step 1: Place your coffin prop upright in a corner or against a wall for stability.
Step 2: Attach faux planks diagonally across the front using hot glue or zip ties for a boarded-up look.
Step 3: Wrap plastic chains around the coffin, letting them drape naturally.
Step 4: Arrange skeleton parts, skulls, and spooky props at the base.
Step 5: Now, just add creepy cloth and a large spider for extra fright factor.
#10. Weathered Wooden Coffin with Mummified Skeleton
This coffin looks like it’s been unearthed after decades, revealing a grotesque mummified figure inside.
Moreover, the weathered wood and splintered planks add a chilling authenticity, while the twisted, dried-up skin on the skeleton makes it look like something straight out of a horror movie.
Perfect for a porch or yard setup, this piece is a surefire way to make trick-or-treaters pause before approaching.
Materials Needed
- Wooden planks (enough to build a 6 ft coffin)
- Nails and screws
- Hammer and drill
- Skeleton prop (full-size)
- Brown and black spray paint
- Plastic wrap and liquid latex
- Wood stain or diluted black paint
Step-by-step Guide
Step 1: Build your coffin frame from wooden planks, keeping edges rough for a rustic, worn look.
Step 2: Lightly sand, then stain or paint the wood with a mix of brown and black to create an aged finish.
Step 3: Wrap the skeleton in plastic wrap, then brush over with liquid latex for a leathery, dried skin texture.
Step 4: Paint the wrapped skeleton with brown and black spray paint for depth.
Step 5: Now, place the skeleton inside the coffin, leaning the lid to the side for a dramatic reveal.
Tip: Add a few scattered autumn leaves and a dusting of flour or baby powder for an old, dusty graveyard vibe.
See more: Turn Your Garden into a Bone-Afide Party With These 22 Skeleton Halloween Ideas
#11. Weathered Wooden Coffin Duo
Wow, these two worn wooden coffins look like they’ve been pulled straight from an abandoned cemetery.
The gray, splintered boards give them a centuries-old appearance, and the gaps in the wood invite the imagination to wonder what might be peeking out.
Great for flanking your front porch or driveway, they set the scene for a chilling Halloween night before anyone even reaches your door.
Materials Needed
- Wooden pallets or reclaimed planks (approx. 6-7 ft each coffin)
- Nails or deck screws
- Hammer or drill
- Handsaw
- Sandpaper (medium grit)
- Gray and black paint
- Optional: skeleton props or LED lights
Step-by-step Guide
Step 1: Dismantle your pallets or gather planks, cutting them to create the tapered coffin shape.
Step 2: Assemble the sides and lid, leaving small gaps between some boards for a rotting effect.
Step 3: Lightly sand the wood to remove sharp splinters but keep it rustic.
Step 4: Next, dry brush with gray and black paint to mimic weather damage.
Step 5: Position your coffins leaning against a wall, or lay them in the yard with moss and leaves for realism.
#12. Life-Size Cardboard Coffin Backdrop
This clean, simple coffin design is perfect for a bold pop of Halloween decor without too much fuss.
Bonus, the bright red interior liner contrasts sharply with the plain brown outer shell, making it stand out even in dim lighting. Its flat, upright build makes it ideal for a party photo booth backdrop or a space-saving decoration along a wall.
Materials Needed
- Large cardboard sheets
- Red wrapping paper or vinyl
- Brown kraft paper or paint
- Hot glue gun and glue sticks
- Utility knife
- Measuring tape and ruler
Step-by-step Guide
Step 1: Measure and cut cardboard panels into the traditional coffin shape.
Step 2: Assemble the panels into a standing coffin frame using hot glue.
Step 3: Cover the outside with kraft paper or paint it brown.
Step 4: Line the inside with red paper or fabric for a dramatic interior.
Step 5: Place against a black backdrop or decorate with cobwebs for added spookiness.
#13. Scalloped Bat-Covered Coffin
Amazingly, this sleek black coffin design adds a subtle yet chilling touch to your Halloween decor.
Its scalloped texture gives it the look of eerie roof shingles, while cut-out bats seem to be flying right off the surface.
Also, the bold “RIP” lettering stands out at the center, creating a focal point perfect for both indoor and outdoor spooky displays.
Materials Needed
- Large cardboard coffin base
- Black craft foam or felt sheets
- Hot glue gun and glue sticks
- Metallic paint for “RIP” letters
- Black cardstock
- Scissors
Step-by-step Guide
Step 1: Create a coffin-shaped base from cardboard.
Step 2: Cut foam or felt into small scalloped pieces and glue them onto the base, overlapping them like shingles.
Step 3: Paint and attach large “RIP” letters in the center.
Step 4: Cut out bat shapes from cardstock and glue them in a scattered pattern for a dynamic look.
Step 5: Optionally, add small LED lights around the border for extra nighttime impact.
Tip: This design works especially well propped against a wall or as a graveyard scene backdrop.
#14. Chained Wooden Coffin
If you’re aiming for an old graveyard vibe, this chained wooden coffin nails the look.
Made from rough, weathered planks, it has a rugged charm that makes it feel like it was pulled straight from an eerie cemetery.
The addition of a heavy chain across the front creates the perfect something dangerous inside effect, making guests wonder what’s trying to get out.
Materials Needed
- Wooden pallets or reclaimed planks
- Hammer and nails or screws
- Metal hinges
- Heavy chain (real or plastic)
- Optional: black or brown wood stain
Step-by-step Guide
Step 1: Disassemble pallets or use old planks to form the coffin shape.
Step 2: Attach planks securely with nails or screws, leaving small gaps for a weathered effect.
Step 3: Add hinges so the lid can open slightly for extra creep factor.
Step 4: Drape a heavy chain diagonally across and secure it with nails or screws.
Step 5: Finally, place the coffin against a tree, wall, or prop it upright for maximum visibility.
#15. Day of the Dead Coffin Door Display
Why not bring a burst of color and culture to your Halloween or Día de los Muertos celebration with this cheerful coffin door display?
Featuring a smiling sugar skull peeking out, paper marigold flowers, and a hand-lettered message in Spanish, it blends spooky charm with heartfelt tradition.
Bonus, the paper flowers add warmth and life, making it a beautiful way to welcome guests.
Materials Needed
- Large piece of cardboard
- Brown craft paper
- Colored tissue paper (orange, yellow, pink, purple, white)
- Scissors and glue
- Black marker for lettering
- Printed or hand-drawn sugar skull
- Double-sided tape or hooks
Step-by-step Guide
Step 1: Cut your cardboard into a coffin shape and cover it with brown craft paper.
Step 2: Make tissue paper marigolds by folding, cutting, and fluffing the paper, then glue them around the coffin edges.
Step 3: Add a sugar skull cutout at the top for a playful yet spooky touch.
Step 4: Use a black marker to write your chosen message in the center.
Step 5: Now, attach hands cut from white paper for extra fun, then hang on your front door.
#16. Burnt Wood Haunted Coffin Prop
You want a prop that looks like it crawled out of a ghost story, this scorched wooden coffin does exactly that.
The darkened edges and rough planks suggest heat, history, and a failed escape, so even in daylight it reads ominous.
You can easily set it beside hay bales or a stone pile and your yard instantly feels like an abandoned graveyard. The build is straightforward, and the finish does all the storytelling for you.
Materials Needed
- 18-22 reclaimed fence boards or pallet planks (36″-72″ long)
- 1×2 lumber for braces (6 pieces, 24″ each)
- 60 exterior screws (1¼”)
- 4 hinges or angle brackets
- Black/brown paint or propane torch (burnt effect)
- Measuring tape, pencil, drill/driver, handsaw
- Optional: chain (6-8 ft), skeleton hand prop
Step-by-step Guide
Step 1: Lay boards on the ground and sketch a coffin outline (about 24″ wide at shoulders, 16″ at feet, 72″ tall). Cut the perimeter planks to shape.
Step 2: Flip and screw 1×2 braces across the back including one at the head, one mid-body, one near the foot.
Step 3: Build a simple lid the same way (fewer planks) and attach with hinges or leave loose.
Step 4: Create the charred look: lightly torch edges or dry-brush black and brown paint, concentrating on corners and seams.
Step 5: Prop it on hay bales or lean it against a tree; drape chain or tuck a skeleton hand between boards.
#17. Cobweb-Covered Vampires Rest
How about turning your Halloween party into a haunted photo op with this eerie standing coffin setup?
Draped in red curtains, tangled with fake cobwebs, and lit with a string of eerie orange lights, it’s the perfect backdrop for chilling snapshots. The empty black coffin invites guests to sit inside, instantly becoming part of the spooky scene.
Also, add a couple of tombstones, burlap, and ragged fabric at the base for an authentic graveyard touch. It’s creepy, fun, and unforgettable for guests of all ages.
Materials Needed
- Wood or sturdy cardboard
- Black paint
- Red fabric or curtains
- Fake cobwebs
- Orange or red string lights
- Burlap and black mesh fabric
- Plastic tombstones
- Chair or stool to place inside coffin
- Hot glue gun, staple gun, and scissors
Step-by-step Guide
Step 1: Build or position your coffin frame upright and paint it black. Then hang red curtains behind the coffin to create a dramatic backdrop.
Step 2: Drape cobwebs generously across the top and sides, weaving in the string lights for a haunting glow.
Step 3: Place a stool or chair inside the coffin so guests can pose comfortably.
Step 4: Scatter burlap, black mesh, and tombstones around the base to complete the graveyard vibe.
#18. Spiderweb Mini Coffin Box
You can also add a subtle yet spooky touch to your Halloween decor with this coffin-shaped shelf, perfect for displaying creepy curiosities or seasonal treats.
Painted in jet black and decorated with crisp white spiderweb designs on the back panels, it creates an instant haunted-house vibe.
You can use it indoors to hold mini pumpkins, potion bottles, candles, or even candy jars for guests. Its sleek design makes it a versatile piece that works well for both Halloween parties and everyday gothic decor.
Materials Needed
- Wood planks or pre-made coffin shelf frame
- Black paint
- White paint or permanent marker
- Paintbrushes
- Sandpaper
- Ruler and pencil
Step-by-step Guide
Step 1: Cut and assemble wood planks into a coffin shape with 3-4 shelves.
Step 2: Sand all surfaces for a smooth finish and paint the entire piece black.
Step 3: Once dry, lightly sketch spiderweb designs onto the back panels using a pencil.
Step 4: Trace over your sketches with white paint or a permanent marker for clean lines.
Step 5: Let everything dry completely before displaying your Halloween trinkets.
#19. Standing Skeleton Coffin with Cobwebs
You can create a spine-chilling focal point for your Halloween decor with this life-sized skeleton posed inside a tall, coffin-shaped frame.
The black backdrop makes the bones stand out, while layers of artificial spiderweb add a creepy, abandoned feel. Perfect for placing in an entryway or living room corner, it’s sure to make guests do a double take.
You can enhance the eerie vibe by dimming the lights and adding a flickering lantern nearby. This decoration works great for haunted house setups or as a dramatic party prop.
Materials Needed
- Life-sized plastic skeleton
- Coffin-shaped wooden or cardboard frame
- Black paint
- Artificial spiderwebs
- Hot glue gun (optional)
Step-by-step Guide
Step 1: Paint your coffin frame black for a classic haunted look and let it dry.
Step 2: Secure the skeleton inside the coffin using screws, nails, or zip ties.
Step 3: Stretch artificial spiderwebs across the entire surface for a natural, web-like effect.
Step 4: Adjust the webbing so it catches light and shadows in a spooky way.
Step 5: Finally, add extra props like rats, spiders, or dim lighting for added fright factor.
Tip: For an outdoor setup, consider using weatherproof materials so your display lasts through the Halloween season.
#20. Chained Black Coffin with Crucifix
What about giving your Halloween display a truly ominous feel with this tall, black coffin wrapped in heavy chains and accented by a gothic cross?
The deep matte black finish absorbs light, making it look even more foreboding in the evening. The cross in the center adds a chilling, old-world cemetery touch.
Perfect for propping up against a wall or garage, it’s a great statement piece for outdoor haunted setups. You can also add a fog machine nearby for a dramatic reveal as guests approach.
Materials Needed
- Wood or cardboard coffin frame
- Black paint
- Plastic or lightweight metal chains
- Decorative cross or gothic ornament
- Hot glue or screws
Step-by-step Guide
Step 1: Build or buy a coffin frame and paint it black for a dark, eerie look.
Step 2: Attach a decorative cross in the center using screws or strong adhesive.
Step 3: Wrap the coffin with chains, securing them at the back so they stay in place.
Step 4: Position the coffin upright against a wall or structure for stability.
Step 5: Now, enhance the display with ambient lighting or fog for maximum impact.
#21. Simple RIP Coffin with Chains
This DIY coffin combines classic Halloween imagery with a bold, no-nonsense design. Painted entirely in black with “RIP” stenciled at the top and a white cross near the base, it instantly sets a spooky mood.
Also, the plastic chains crisscross over the front, giving it a locked-away, mysterious vibe. Lightweight and compact, it’s perfect for indoor corners, haunted house setups, or porch displays.
Its clean lines make it a versatile decoration you can pair with skeleton props, fake cobwebs, or dim lighting for an extra eerie effect.
Materials Needed
- Cardboard or thin plywood coffin frame
- Black paint
- White paint or stencil for lettering and cross
- Plastic chains
- Hot glue or tape for securing chains
Step-by-step Guide
Step 1: Build or cut out a coffin shape from cardboard or plywood. Then paint the entire surface black and allow it to dry completely.
Step 2: Use a stencil or freehand the “RIP” and cross with white paint.
Step 3: Drape and cross the chains over the front, securing them at the edges.
Step 4: Place in your desired location and add props or lighting for a dramatic touch.
#22. Chained and Locked Skeleton Coffin
This eerie coffin looks like it’s been buried for centuries and is now breaking open from the inside. Its weathered wood panels are cracked and splintered, revealing skeletal hands desperately pushing through.
Bonus, heavy chains wrap tightly around it, secured with a large, aged padlock, adding a chilling keep it shut warning.
Perfect for haunted trails, outdoor graveyard scenes, or front-yard horror displays, this design delivers instant Halloween fright.
Materials Needed
- Wooden planks or weathered wood panels
- Skeleton hand props
- Plastic or metal chains
- Large faux padlock
- Gray, black, and brown paint for aging effect
- Hot glue or screws
Step-by-step Guide
Step 1: Build the coffin structure from wooden planks, leaving some boards cracked or gapped.
Step 2: Paint the wood in shades of gray, black, and brown to create an aged, weathered appearance.
Step 3: Attach skeleton hands so they appear to be breaking through the gaps.
Step 4: Wrap chains around the coffin and secure with a large faux padlock.
Step 5: Place outdoors on dirt or leaves for a realistic, abandoned grave effect.
Read more: 20 Hauntingly Cool DIY Halloween Archway Ideas for a Spine-Tingling Welcome
