When I was a kid, I used to line up my toy cars by color, reds in the fast lane, blues in the cool lane, and anything with flames got pole position.
I never outgrew that tiny obsession. Years later, those same little cars were tucked away in a box until one rainy afternoon, I decided to turn them into wall art.
That one idea spun into a dozen more, each more fun, personal, and oddly meaningful than the last.
Turns out, toy cars aren’t just playthings. They're memories, design pieces, and conversation starters. If you’ve got a soft spot for mini motors, you’re going to love these 20 creative projects.
If you’ve ever wanted to bring a little architectural magic into your living room or your kid’s toy collection, this suspension bridge shelf is a masterpiece.
Moreover, modeled after iconic suspension bridges like the Golden Gate, this display lets your miniature cars line up as if cruising high above the city.
Step 1: Cut your base plank to the desired length and attach the two upright towers near each end using wood screws or strong glue.
Step 2: Drill small holes at the tops of the towers and along the plank edges to thread or fix your wire/dowels as suspension cables.
Step 3: Create the cable effect by running the wires or rods in curved lines from the towers to the baseboard.
Step 4: Secure all points tightly and paint or stain the structure for a cohesive look.
Step 5: Finally, mount the entire shelf on the wall using anchors and ensure it's level, then load it with Hot Wheels.
If you're the type who loves a little drama with your decor, this glowing tire shelf is your dream garage display.
Specially, this project is perfect for a game room, garage wall, or a kid’s room that refuses to be boring.
Step 1: Clean the tire thoroughly and sand off any rough patches. If you like, spray paint it for a smoother finish and let dry.
Step 2: Cut and paint your slats, then glue or screw them evenly across the circular backing.
Step 3: Mount the LED strip around the inside rim of the tire. Then secure the strip and hide the wires neatly behind the backing.
Step 4: Attach the slatted backing into the tire frame securely. Now you mount the whole piece on your wall using heavy-duty brackets.
This one hit me right in the feels. You take a moment frozen in time, your kid riding their bike, or maybe a snapshot of your first road trip and surround it with tiny cars that once raced across your living room floor.
Additionally, this toy car frame is more than just wall decor. It’s a memory keeper with horsepower. And the best part is that it’s so easy to make.
Step 1: Clean the photo frame and each toy car, then dust and grease will keep glue from sticking well.
Step 2: Arrange your toy cars around the frame without glue first to test spacing. You can mix colors, go rainbow-style, or group by type.
Step 3: Apply glue to the base of each car, then press firmly onto the frame. Hold for 10-15 seconds to secure.
Step 4: Let the frame dry flat for a few hours before hanging or placing it upright.
This toy car wall clock is one of those projects that just makes you grin. I mean, who wouldn’t want to turn an old car rim and a handful of Hot Wheels into a bold statement piece?
If you've got a collection of toy cars collecting dust or an old wheel you couldn't toss, this is your sign to give them new life.
Step 1: Clean the wheel rim thoroughly. If you want to change its color, sand lightly and spray-paint it in your desired shade.
Step 2: Drill a small hole in the center of the rim to fit the clock mechanism. Then insert the clock kit and secure it following the product instructions.
Step 3: Mark twelve even positions around the rim like a traditional clock. You can use super-strong adhesive to attach each acrylic shelf in place.
Step 4: Once shelves are firmly set, glue a toy car on each one.
Who says Valentine’s Day has to be all about hearts and flowers? These toy car cards are an absolute winner for kids.
You can see they're fun, easy to make, and full of charm, plus, no sugar crash involved. Each car is tied to a custom card with a pun creating a playful little gift that feels thoughtful and exciting.
Step 1: Punch two holes side by side in the middle of each card, just wide enough for the car's body to fit between them.
Step 2: Write your Valentine's message on the card. Feel free to get punny like “I wheelie like you” or “You auto be my Valentine” always get smiles.
Step 3: Place a toy car on the card and use string to tie it down through the holes, securing it tightly but gently.
Sometimes, the best DIY ideas are sitting right under your nose or, in this case, under your electrical cable.
This two-tier Hot Wheels race track was made from an old industrial spool, and it transforms into a thrilling, spiraling speedway with just a few smart upgrades.
Step 1: Clean the spool and paint the top and bottom surfaces black to resemble a road. Then add dashed white lines using a stencil or tape guide.
Step 2: Cut and attach road pieces around the sides and over the edge using thick cardboard or flexible board, curving it to form ramps or spirals.
Step 3: Secure the road edges with hot glue or screws so they stay in place during play.
Step 4: Paint green grass felt in the center and base for visual contrast and character.
Step 5: Finally, add some finishing touches like mini trees, rocks, or even signage to make it feel like a real racing world.
If you've ever opened a drawer to find your mini car collection all banged up and forgotten, this project might just spark something joyful.
Also, you get to see every curve, every decal, every favorite. Whether you’re preserving nostalgia or showing off a collection you’re still building, this wall piece becomes a conversation starter and a personal tribute to the joy of tiny wheels.
Step 1: Remove the back of the shadow box frame and line it with black foam board or cardstock for a clean display background.
Step 2: Arrange your toy cars inside the frame to test layout. Then slight angles and layering create a dynamic, packed look.
Step 3: Glue each car in place one at a time, holding firmly to set. You can use mounting putty if you prefer a removable option.
Step 4: Once dry, reattach the backing and hang your frame or display it on a shelf.
This little DIY feels like a nostalgic wink to your childhood. Turning Hot Wheels into bag charms is one of those ideas that makes people stop and smile.
Plus, they’re practically free if you’ve got old toy cars lying around. A fun afternoon project with your kid or just a quirky upgrade for your everyday carry.
Step 1: If using a screw eye, carefully twist it into the top of the car. You can pre-drill a small pilot hole to make it easier. If not, use strong glue to attach the chain’s base directly to the car.
Step 2: Attach the chain to the screw eye or glued surface, then add your keyring.
Step 3: Clip it to your bag or backpack and enjoy the compliments from strangers who secretly wish they had one too.
You know that mirror you walk past every day without giving it a second thought? Well, here’s how to turn it into the coolest piece on your wall with nothing but your old toy car collection.
Plus, this circular mirror surrounded by Hot Wheels feels like a portal to a tiny, colorful world. It’s fun, a bit nostalgic, and perfect for adding character to a bedroom, playroom, or even a hallway.
Step 1: Clean the mirror's edge thoroughly to ensure the glue adheres well.
Step 2: Arrange your cars around the mirror’s perimeter, playing with colors and styles for balance. Then use a ruler to space them evenly if you want a more precise look.
Step 3: Glue each car in place, pressing down firmly for a few seconds to make sure they stick.
Step 4: Let the glue dry for at least 24 hours before hanging the mirror back up and prepare to be asked where you got it!
If your kid's toy bin is bursting with tiny cars no longer driven or loved, here's a brilliant way to repurpose them. This toy car table lamp doesn’t just glow, it tells stories.
Whether it’s a quirky touch in a kid’s room or an unexpected statement in your office, this lamp adds playfulness and personality with every flick of the switch.
Step 1: Clean the lamp base and toy cars with a damp cloth and let them dry completely.
Step 2: Arrange the cars in a rough layout to get a sense of spacing and how they’ll stack.
Step 3: Apply glue to the underside or side of each car, then begin pressing them onto the lamp base one at a time, starting from the bottom. You should hold each in place for 30 seconds to temporarily support them.
Step 4: Allow the glue to cure for several hours before using the lamp again. Once dry, plug it in and enjoy your new favorite piece of functional art.
If you’ve got a collection of model cars too beautiful to hide away in a box, this vertical zigzag shelf is a dream come true.
Plus, the staggered look adds visual rhythm, and you can adjust the height to match any room setup. It also instantly adds personality to a dull corner, and the whole thing feels like building blocks for grownups.
Step 1: Paint or finish all the wood pieces if you want a polished look.
Step 2: Attach the vertical backing board to the wall using screws and anchors.
Step 3: Starting from the top, measure and mark where each mini shelf will sit, alternating sides as you go down to create the zigzag.
Step 4: Secure each shelf in place using wood glue or screws. You should let it cure overnight before adding your favorite toy cars.
This sweet little creation turns a toy car into a heartfelt wedding keepsake and honestly, it’s adorable.
Also, tiny bills roll behind it like tin cans, ribbons flow like a veil, and wooden hearts capture the couple’s names and date.
Step 1: Clean the wooden base and layout your design, then place the car near the bottom with room for cans to trail behind.
Step 2: Tie small ribbons and lace around the car doors and rear; attach tulle for that wedding veil look.
Step 3: Roll small bills or paper scrolls, tie with mini ribbon bows, and glue to the board trailing from the car’s back bumper.
Step 4: Add hearts with names and wedding date at the top, and any decorative accents like crowns or florals.
Step 5: Finally, attach the car securely with strong glue.
Some things just make a kid’s room feel more magical and this circular toy car shelf with a winding mural road is one of those things.
You glance at it and instantly imagine tiny cars zooming across the wall and looping home to their round garage. What I love most is that it’s playful, tidy, and gives toy cars a place of honor, not clutter.
Step 1: Mount the circular wire shelf securely to the wall using screws and anchors. Then use a level to make sure it's straight.
Step 2: Install the interior shelves inside the circle if not pre-attached. You need to apace them evenly to allow enough room for each car.
Step 3: Paint or apply a black road decal starting from the corner of the wall and curve it toward the shelf, giving it a flowing motion.
Step 4: Add white stripes to mimic road markings, then let everything dry before loading up the cars.
This project made me feel like a kid again. There's something personal, playful, and oddly powerful about turning a bunch of forgotten toy cars into a bold letter that speaks your name or your child’s.
Step 1: Clean the toy cars and paint the letter if desired.
Step 2: Lay out the cars on the letter without glue first to get a feel for placement. You should mix colors, angles, and sizes for a more dynamic look.
Step 3: Apply glue to the base or side of each car and press it firmly onto the letter. You can work in small sections so the glue doesn’t dry before you finish.
Step 4: Let everything cure flat for several hours (overnight is best). Then hang it on the wall or lean it on a shelf.
This DIY racetrack setup is an absolute dream for any car-obsessed kid or adult with a nostalgic heart.
You can stage races, park dozens of mini cars, or let your imagination build stories around it. It’s also surprisingly sturdy and detailed, with cutout trees, sponsor decals, and layered roadways that look like a real racetrack!
Step 1: Sketch your layout on a flat piece of cardboard, you decide where the ramps, turns, and spiral garage will go.
Step 2: Cut cardboard strips for roads (about 3-4 inches wide) and supports for elevation. You should start building base layers and use hot glue to attach securely.
Step 3: For the spiral track, cut long curved strips and stack them on cardboard supports, gluing as you go to form a smooth slope.
Step 4: Add walls along the road to keep cars from falling off and decorate using decals, paint, and small props like fences or flags.
Here’s a project that turns chaos into speed and color. If you’ve got a dozen old toy cars sitting around, why not give them a second life in the fast lane right on your wall?
This Hot Wheels art piece looks like it’s mid-race, frozen in time, and the motion streaks behind each car make the whole thing feel alive.
Step 1: Lay out your cars on the board in diagonal or staggered rows and mark their placement lightly with chalk or tape.
Step 2: Use a fine brush to paint colorful streaks behind where each car will sit. Then flick the paint outward to create motion effects and match each streak color to the car for a sleek look.
Step 3: Once the paint dries, glue each car securely in place along its matching trail.
This one’s for the collectors who want to elevate their love for diecast cars into true wall-worthy art.
You’re not just showing off a car, you’re telling its story: piece by piece, design to detail. It's also a clever way to honor a special edition or showcase a favorite model in a new light
Step 1: Carefully take apart the Hot Wheels car using a mini screwdriver or prying tool, you need to separate the body, base, wheels, and interior.
Step 2: Place the backing board into the frame and arrange each car piece in a tidy vertical or grid layout, leaving enough space between for clarity.
Step 3: Glue down each part carefully using a small amount of strong adhesive.
Step 4: Add a small printed or handwritten label with the car’s full name and series underneath for a museum-style finish.
Built using a shoebox, felt, and a few toilet paper rolls, this setup mimics those spinning brushes and curtains your car passes through at a real-life wash. It’s adorable, budget-friendly, and offers a fun, hands-on way to bring Hot Wheels play to life.
Step 1: Cut both short ends off the shoebox to create an open tunnel structure, then cover the inside walls with colored paper.
Step 2: Wrap felt around each toilet paper roll and cut fringes into them to resemble car wash brushes.
Step 3: Glue the rolls standing upright on the inside base of the box and at the back for a full wash experience.
Step 4: Finally, twist pipe cleaners into arches or hang felt strips down from the entrance to create the curtain effect.
What about turning your car collection into wall-worthy art with this sleek hexagon display setup?
Perfect for modern rooms or creative workspaces, this honeycomb-inspired design adds both organization and serious style. Each car sits in its own little stage, and the staggered layout keeps it from looking too rigid or plain.
Step 1: Arrange the hexagons on the floor first to plan your layout. You can use a mix of colors (white, gray, blue, black) for a dynamic visual effect.
Step 2: Once you like the design, begin mounting the shelves on the wall using double-sided adhesive or command strips. Start from the center and work outward to keep symmetry.
Step 3: Use a level frequently to make sure your shelves are straight, especially with angled wall patterns.
Step 4: Place one car per shelf, organizing by color, brand, or even theme.
If fashion is your racetrack, this belt is in first place. Made entirely of Hot Wheels cars clipped or sewn onto denim shorts, this playful, bold accessory is part DIY, part wearable art.
Step 1: Choose cars that are lightweight and similarly sized for balance and comfort.
Step 2: Attach one side of the Velcro dot to each car’s underside, and the matching dot to the shorts or belt. If using zip ties, loop through wheel wells and secure around the belt loops or waistband.
Step 3: Press the cars firmly onto the Velcro evenly so the cars sit snug but not too tight.
Visit our site and see all other available articles!